New construction Commercial Services Gallery Service areas (517) 849-2376Request a bid
Taping and finishing

Taped, coated,
sanded flat.

Taping and finishing for builders and general contractors, on board we hang or board that is already up.

Taping and finishing

The part the
buyer sees.

If the board is already hung, we come in to finish it. Joints taped, corner bead set true, three coats of compound feathered wide and dried between coats, then sanded to a level 4 or level 5 finish to your spec.

Board hung by another crew gets walked first. A finish is only as good as the hang under it, so we flag anything that needs fixing before the first coat goes on.

01

Taped

Joints and corners set true.

02

Three coats

Feathered wide, dried between.

03

Level 4 or 5

Sanded to the level you spec.

What the walk-through finds

The finish is
in the mud.

Board goes up fast on any job. Whether your walk-through is clean or a punch list full of seams comes down to the part in the middle: the tape, the coats and the sand. That is where we spend the time, so your painter gets a flat wall and the buyer never sees a joint.

The hang
Half the job is screws

Board hung tight, square and fastened right, seams staggered and kept off door and window corners, screws set just below the paper. Rush the hang and every joint taped afterward is fighting a gap.

The mud
Three coats on every joint

Tape, then three coats of compound, each one wider and feathered past the last, dried and knocked down between coats. One heavy coat sanded thin is how joints end up showing through the paint.

The sand
Level 4 or level 5, to spec

Level 4 is the usual standard for walls getting flat paint. Where the plans call for level 5, or big windows and can lights throw light across a wall, the whole surface gets a skim coat so the painter lands on one even plane.

How a bid works

Plans in,
price back.

Send the plans, tell us the town and the dates, and we price the drywall. If the job fits our schedule, it goes on the calendar with your dates on it.

Request a bid
1

Send the plans

Email plans or a takeoff to mm_drywall@yahoo.com, or use the bid form. Include the town, rough square footage and when the job is ready for board.

2

Get the bid

Hanging, taping, finishing and texture priced from the plans, at the finish level you spec. If something on the plans is unclear, we ask before we price it.

3

Hang, tape, finish

On site on the dates we agreed. Board hung, joints taped and coated, sanded and textured, ready for paint.

4

Walk-through

We walk it with you or your super, close out the punch list, and leave the job broom clean for the painter.

Good to know

Builder questions,
answered.

Will you finish board that someone else hung?
Yes. We tape, coat and sand board that is already up to a level 4 or level 5 finish. We walk it first, because a finish is only as good as the hang under it, and we flag anything that needs fixing before we start.
What is the difference between a level 4 and a level 5 finish?
Level 4 is tape, three coats of compound and a sand, the usual standard for walls getting flat paint. Level 5 adds a skim coat over the whole surface. It is worth it on walls that catch raking light from big windows or can lights, and on any wall the plans call out for it.
Do you set corner bead?
Yes. Outside corners get bead set straight and coated with the rest of the finish, so the corners read as clean lines once the paint is on.
Do you work with my painter?
Yes. We hand the job over sanded and broom clean so the painter can start. If your painter finds a spot that needs another pass, call us and we come back for it.
M & M Dry Wall

Finish the board.

(517) 849-2376
Jonesville, MI · Bids from plans
(517) 849-2376

Request a bid.

New home or commercial build? Tell us the town, the square footage and the timeline. Plans can go straight to mm_drywall@yahoo.com.

CallRequest a bid